' The Douglas A-4 Skyhawk is a carrier-capable ground-attack aircraft designed for the United States Navy and U.S. Marine Corps. The delta winged "Skyhawk", powered by a single turbojet was designed and produced by Douglas Aircraft Company (later McDonnell Douglas). The "Skyhawk" was originally designated the A4D under the US Navy's pre-1962 designation system. Fifty years after the aircraft's first flight, and having played key roles in the Vietnam War, the Falklands War, and the Yom Kippur War, a few of the nearly 3,000 Skyhawks produced remain in service with several air arms around the world, including active duty on the aircraft carrier of the Brazilian Navy. Features : * All Wood Built Up Construction! * VCOTE 2 - 3DS 3D Detailing System! * Factory Installed Pilot and Cockpit Detailing! * Pre-installed composite Engine Mount! * Scale like rendition of panel lines, rivets and graphics! * Wing Tip Flashing Bright LED Light Set factory installed! * Flaperon Ready! * One Piece Factory Assembled Wing! * Retract Ready! * Mechanical Recommended such as... Robart #ROB-608HD Mains & #ROB-610 Nose Gear * Pre-hinged Control Surfaces... Factory Installed and Pinned! * Control Rods pre-installed! * ONE PIECE - Delta Symmetrical Wing! * Full Color Illustrated Assembly Manual This kit comes in ARF versions, everything you need for ready to fly must be purchased seperately

Specification : Span: 42.5 in (1080 mm) Area: 450 sq in Airfoil: One Piece - Delta Symmetrical Length: 51 in. (1295 mm) Flying Weight (Dry): 7.5 - 8.0 lbs (3409 - 3636g) Engine: .45-.52 cu in. (6.5-8.5cc). JBA 46 Recommended. For High Performance use JBA 56 Radio: 4 ch with 5 servos. Main Gear: Wire. Retracts: Fixed Gear. Retract Ready